There are a lot of concerns about the production of light boxes. Different types of light boxes in stores have different preventive measures, so we need to pay attention to the production of ultra-thin light boxes. How can the production of light boxes get the ideal effect? Let's have a look at it with you from Jinan light box manufacturer Xiaobian.
1. Distance between lamp tube and lamp box
The inner tube of the light box will be too close to the shape of the "rib" of the light box machine from the outside. If it is too far away, the brightness of the light box will be reduced. Generally, the large box will be 10cm from the light box. Of course, because of the different brands of light transmittance film, the light cloth of the light transmittance is different, so the best distance between the lower lamp and the box will also be different. The shop decoration design company suggests that a small sample test be done first;
2. Pipe density
It is recommended to install one tube every 20 cm, and the distance between the two tubes should not exceed 25 cm. In addition, under normal conditions, the light pipe shall be arranged vertically. If the height of the tube is greater than one tube but less than the length of the two tubes, the dislocation method is recommended, i.e. line 1, line 3 and line 5 are upward, line 2, line 4 and line 6 are downward.
3. About the brightness of the light box
The brightness of the light box first depends on the density of the quality and the arrangement of the lamps, as well as the quality of the light cloth film. Of course, it is also related to other factors. For example, if the light is turned off as much as possible, it is recommended to use galvanized iron sheet to come back, which can have the function of diffusion and strengthen the light. If you want to have more brightness, it is recommended to put a layer of AI good film on the back plate, and then install the lamps;
4. Side hung double-sided light box
The suggestion of making the side hung double-sided light box is to make its horizontal section into trapezoid, that is, one side of the wall is large and the other side is small, so as to reduce the wind resistance and improve the coefficient of the light box.
5. Waterproof baffle at the top of light box
The waterproof light house itself doesn't say much. Most of the light boxes can't be used for a long time. The surface of the light box is very dirty, especially the "Yang light box" with white light cloth as the main body, such as China CITIC Bank. Because the air quality is poor now, the dust and rain in the air will form a "black water" box. The surface of the box flows and hasn't been cleaned for a long time, Therefore, it is suggested to produce the net wealth on the top of the high-end light box to let it slightly tilt the structure, so that a person can do the cornice after the stainless steel plate is about to leave, to meet the advance reservation of water transfer by rain, and to reduce the water pollution of the light box.
The above is the relevant content introduced by Jinan light box manufacturer. For more information, please visit the website: